程序包 org.bukkit.configuration

类 MemorySection

java.lang.Object
org.bukkit.configuration.MemorySection
所有已实现的接口:
ConfigurationSection
直接已知子类:
MemoryConfiguration
public class MemorySection extends Object implements ConfigurationSection
A type of ConfigurationSection that is stored in memory.

  • 字段详细资料

  • 构造器详细资料

    • MemorySection

      protected MemorySection()
      Creates an empty MemorySection for use as a root Configuration section.

      Note that calling this without being yourself a Configuration will throw an exception!

      抛出:
      IllegalStateException - Thrown if this is not a Configuration root.

    • MemorySection

      protected MemorySection(ConfigurationSection parent, String path)
      Creates an empty MemorySection with the specified parent and path.
      参数:
      parent - Parent section that contains this own section.
      path - Path that you may access this section from via the root Configuration.
      抛出:
      IllegalArgumentException - Thrown is parent or path is null, or if parent contains no root Configuration.

  • 方法详细资料

    • getKeys

      public Set<String> getKeys(boolean deep)
      从接口复制的说明: ConfigurationSection
      获取此配置文件的键集合.

      如果为 true, 则返回包括所有的能访问到的键的集合. 类似于获取硬盘中第一层目录还是遍历全部子目录.

      例如:

      top1. Second1

      top1. Second2

      top2. Second1

      top2. Second2

      原文: Gets a set containing all keys in this section.

      If deep is set to true, then this will contain all the keys within any child ConfigurationSections (and their children, etc). These will be in a valid path notation for you to use.

      If deep is set to false, then this will contain only the keys of any direct children, and not their own children.

      指定者:
      getKeys 在接口中 ConfigurationSection
      参数:
      deep - 获取全部键, 或者仅仅获取表层键.
      返回:
      将返回一个 set, 装载着符合要求的键.

    • getValues

      public Map<String,Object> getValues(boolean deep)
      从接口复制的说明: ConfigurationSection
      获取这个配置文件的键值集合.

      如果为 true, 则返回包括所有的能访问到的键和值的集合. 类似于获取硬盘中第一层目录还是遍历全部子目录.

      如果为 false, 则返回表层的键和值的集合.

      原文: Gets a Map containing all keys and their values for this section.

      If deep is set to true, then this will contain all the keys and values within any child ConfigurationSections (and their children, etc). These keys will be in a valid path notation for you to use.

      If deep is set to false, then this will contain only the keys and values of any direct children, and not their own children.

      指定者:
      getValues 在接口中 ConfigurationSection
      参数:
      deep - 获取全部键值集合(true), 或者仅仅获取表层键值集合(false).
      返回:
      返回一个 Map.

    • contains

      public boolean contains(String path)
      从接口复制的说明: ConfigurationSection
      检查 ConfigurationSection 是否包含指定路径.

      如果这个路径不存在, 但已指定一个缺省值, 也将返回 true.

      原文: Checks if this ConfigurationSection contains the given path.

      If the value for the requested path does not exist but a default value has been specified, this will return true.

      指定者:
      contains 在接口中 ConfigurationSection
      参数:
      path - 要检查的路径
      返回:
      如果此部分包含请求的路径，可以通过默认的或者被设置.

    • contains

      public boolean contains(String path, boolean ignoreDefault)
      从接口复制的说明: ConfigurationSection
      Checks if this ConfigurationSection contains the given path.

      If the value for the requested path does not exist, the boolean parameter of true has been specified, a default value for the path exists, this will return true.

      If a boolean parameter of false has been specified, true will only be returned if there is a set value for the specified path.

      指定者:
      contains 在接口中 ConfigurationSection
      参数:
      path - Path to check for existence.
      ignoreDefault - Whether or not to ignore if a default value for the specified path exists.
      返回:
      True if this section contains the requested path, or if a default value exist and the boolean parameter for this method is true.

    • isSet

      public boolean isSet(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 Set.

      如果路径存在, 但不是 Set, 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if this ConfigurationSection has a value set for the given path.

      If the value for the requested path does not exist but a default value has been specified, this will still return false.

      指定者:
      isSet 在接口中 ConfigurationSection
      参数:
      path - 检查路径.
      返回:
      True if this section contains the requested path, regardless of having a default.

    • getCurrentPath

      public String getCurrentPath()
      从接口复制的说明: ConfigurationSection
      从根 Configuration 中获取这个 ConfigurationSection 的路径.

      如果这个 ConfigurationSection 已经是根目录, 将返回一个空字符串.

      如果这个 ConfigurationSection 不属于任何根目录, 将返回 null.

      如果要获取这个 ConfigurationSection 名字,也就是路径中的最后一节, 你应该使用 ConfigurationSection.getName() 来获取.

      原文: Gets the path of this ConfigurationSection from its root Configuration.

      For any Configuration themselves, this will return an empty string.

      If the section is no longer contained within its root for any reason, such as being replaced with a different value, this may return null.

      To retrieve the single name of this section, that is, the final part of the path returned by this method, you may use ConfigurationSection.getName().

      指定者:
      getCurrentPath 在接口中 ConfigurationSection
      返回:
      这个片段相对于其根的路径.

    • getName

      public String getName()
      从接口复制的说明: ConfigurationSection
      Gets the name of this individual ConfigurationSection, in the path.

      This will always be the final part of ConfigurationSection.getCurrentPath(), unless the section is orphaned.

      指定者:
      getName 在接口中 ConfigurationSection
      返回:
      Name of this section

    • getRoot

      public Configuration getRoot()
      从接口复制的说明: ConfigurationSection
      Gets the root Configuration that contains this ConfigurationSection

      For any Configuration themselves, this will return its own object.

      If the section is no longer contained within its root for any reason, such as being replaced with a different value, this may return null.

      指定者:
      getRoot 在接口中 ConfigurationSection
      返回:
      Root configuration containing this section.

    • getParent

      public ConfigurationSection getParent()
      从接口复制的说明: ConfigurationSection
      Gets the parent ConfigurationSection that directly contains this ConfigurationSection.

      For any Configuration themselves, this will return null.

      If the section is no longer contained within its parent for any reason, such as being replaced with a different value, this may return null.

      指定者:
      getParent 在接口中 ConfigurationSection
      返回:
      Parent section containing this section.

    • addDefault

      public void addDefault(String path, Object value)
      从接口复制的说明: ConfigurationSection
      给指定路径添加一个缺省值.

      如果缺省值 Configuration 没有被提供, 则自动创建一个新的.

      如果值为 null, 表示从缺省值 Configuration 中删除这个路径上的默认值

      如果 ConfigurationSection.getDefaultSection() 返回的值为 null, 则建立一个新的

      原文: Sets the default value in the root at the given path as provided.

      If no source Configuration was provided as a default collection, then a new MemoryConfiguration will be created to hold the new default value.

      If value is null, the value will be removed from the default Configuration source.

      If the value as returned by ConfigurationSection.getDefaultSection() is null, then this will create a new section at the path, replacing anything that may have existed there previously.

      指定者:
      addDefault 在接口中 ConfigurationSection
      参数:
      path - 要设置缺省值的路径.
      value - 要设置的值.

    • getDefaultSection

      public ConfigurationSection getDefaultSection()
      从接口复制的说明: ConfigurationSection
      Gets the equivalent ConfigurationSection from the default Configuration defined in ConfigurationSection.getRoot().

      If the root contains no defaults, or the defaults doesn't contain a value for this path, or the value at this path is not a ConfigurationSection then this will return null.

      指定者:
      getDefaultSection 在接口中 ConfigurationSection
      返回:
      Equivalent section in root configuration

    • set

      public void set(String path, Object value)
      从接口复制的说明: ConfigurationSection
      Sets the specified path to the given value.

      If value is null, the entry will be removed. Any existing entry will be replaced, regardless of what the new value is.

      Some implementations may have limitations on what you may store. See their individual javadocs for details. No implementations should allow you to store Configurations or ConfigurationSections, please use ConfigurationSection.createSection(java.lang.String) for that.

      指定者:
      set 在接口中 ConfigurationSection
      参数:
      path - Path of the object to set.
      value - New value to set the path to.

    • get

      public Object get(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 Object 类型的值.

      如果这个 Object 不存在, 但已指定一个缺省值, 这将返回缺省值.

      如果这个 Object 不存在, 并且没有指定缺省值, 则返回 null.

      原文: Gets the requested Object by path.

      If the Object does not exist but a default value has been specified, this will return the default value. If the Object does not exist and no default value was specified, this will return null.

      指定者:
      get 在接口中 ConfigurationSection
      参数:
      path - 获取 Object 的路径.
      返回:
      返回一个 Object.

    • get

      public Object get(String path, Object def)
      从接口复制的说明: ConfigurationSection
      在指定路径上获取一个 Object , 如果无法获取, 则直接返回默认值.

      如果 Object 无法在 Configuration 中被获取, 则不会尝试去缺省列表中去寻找, 而是直接返回指定的默认值.

      原文: Gets the requested Object by path, returning a default value if not found.

      If the Object does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.

      指定者:
      get 在接口中 ConfigurationSection
      参数:
      path - 获取 Object 的路径.
      def - 当指定路径上没有值, 返回这个值.
      返回:
      返回一个Object.

    • createSection

      public ConfigurationSection createSection(String path)
      从接口复制的说明: ConfigurationSection
      Creates an empty ConfigurationSection at the specified path.

      Any value that was previously set at this path will be overwritten. If the previous value was itself a ConfigurationSection, it will be orphaned.

      指定者:
      createSection 在接口中 ConfigurationSection
      参数:
      path - Path to create the section at.
      返回:
      Newly created section

    • createSection

      public ConfigurationSection createSection(String path, Map<?,?> map)
      从接口复制的说明: ConfigurationSection
      Creates a ConfigurationSection at the specified path, with specified values.

      Any value that was previously set at this path will be overwritten. If the previous value was itself a ConfigurationSection, it will be orphaned.

      指定者:
      createSection 在接口中 ConfigurationSection
      参数:
      path - Path to create the section at.
      map - The values to used.
      返回:
      Newly created section

    • getString

      public String getString(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 String 类型的值.

      如果这个 String 不存在, 但已指定一个缺省值, 这将返回缺省值.

      如果这个 String 不存在, 并且没有指定缺省值, 则返回 null.

      原文: Gets the requested String by path.

      If the String does not exist but a default value has been specified, this will return the default value. If the String does not exist and no default value was specified, this will return null.

      指定者:
      getString 在接口中 ConfigurationSection
      参数:
      path - 获取 String 的路径.
      返回:
      返回一个 String.

    • getString

      public String getString(String path, String def)
      从接口复制的说明: ConfigurationSection
      在指定路径上获取一个 String , 如果无法获取, 则直接返回默认值.

      如果无法获取到一个 String, 将不会尝试去缺省列表中去获取, 而是直接返回指定的默认值.

      原文: Gets the requested String by path, returning a default value if not found.

      If the String does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.

      指定者:
      getString 在接口中 ConfigurationSection
      参数:
      path - 获取 String 的路径.
      def - 当指定路径上没有值, 或者不是 String 类型时, 返回这个值.
      返回:
      返回一个 String.

    • isString

      public boolean isString(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 String.

      如果路径存在, 但不是 String, 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if the specified path is a String.

      If the path exists but is not a String, this will return false. If the path does not exist, this will return false. If the path does not exist but a default value has been specified, this will check if that default value is a String and return appropriately.

      指定者:
      isString 在接口中 ConfigurationSection
      参数:
      path - 检查指定路径是否是 String.
      返回:
      指定路径是否是 String.

    • getInt

      public int getInt(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 int 类型的值.

      如果这个 int 不存在, 但已指定一个缺省值, 这将返回缺省值.

      如果这个 int 不存在, 并且没有指定缺省值, 则返回 0 .

      原文: Gets the requested int by path.

      If the int does not exist but a default value has been specified, this will return the default value. If the int does not exist and no default value was specified, this will return 0.

      指定者:
      getInt 在接口中 ConfigurationSection
      参数:
      path - 获取 int 的路径.
      返回:
      返回一个 int.

    • getInt

      public int getInt(String path, int def)
      从接口复制的说明: ConfigurationSection
      在指定路径上获取一个 int, 如果无法获取, 则直接返回默认值.

      如果无法获取到一个 int, 将不会尝试去缺省列表中去获取, 而是直接返回指定的默认值.

      原文: Gets the requested int by path, returning a default value if not found.

      If the int does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.

      指定者:
      getInt 在接口中 ConfigurationSection
      参数:
      path - 获取 int 的路径.
      def - 当指定路径上没有值, 或者不是 int 类型时, 返回这个值.
      返回:
      返回一个 int.

    • isInt

      public boolean isInt(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 int.

      如果路径存在, 但不是 int, 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if the specified path is a int.

      If the path exists but is not a int, this will return false. If the path does not exist, this will return false. If the path does not exist but a default value has been specified, this will check if that default value is a int and return appropriately.

      指定者:
      isInt 在接口中 ConfigurationSection
      参数:
      path - 检查指定路径是否是 int.
      返回:
      指定路径是否是 int.

    • getBoolean

      public boolean getBoolean(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 boolean 类型的值.

      如果这个 boolean 不存在, 但已指定一个缺省值, 这将返回缺省值.

      如果这个 boolean 不存在, 并且没有指定缺省值, 则返回 false.

      原文: Gets the requested boolean by path.

      If the boolean does not exist but a default value has been specified, this will return the default value. If the boolean does not exist and no default value was specified, this will return false.

      指定者:
      getBoolean 在接口中 ConfigurationSection
      参数:
      path - 获取 boolean 的路径.
      返回:
      返回一个 boolean.

    • getBoolean

      public boolean getBoolean(String path, boolean def)
      从接口复制的说明: ConfigurationSection
      在指定路径上获取一个 boolean, 如果无法获取, 则直接返回默认值.

      如果无法获取到一个 boolean, 将不会尝试去缺省列表中去获取, 而是直接返回指定的默认值.

      原文: Gets the requested boolean by path, returning a default value if not found.

      If the boolean does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.

      指定者:
      getBoolean 在接口中 ConfigurationSection
      参数:
      path - 获取 boolean 的路径.
      def - 当指定路径上没有值, 或者不是 boolean 类型时, 返回这个值.
      返回:
      返回一个 boolean.

    • isBoolean

      public boolean isBoolean(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 boolean.

      如果路径存在, 但不是 boolean, 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if the specified path is a boolean.

      If the path exists but is not a boolean, this will return false. If the path does not exist, this will return false. If the path does not exist but a default value has been specified, this will check if that default value is a boolean and return appropriately.

      指定者:
      isBoolean 在接口中 ConfigurationSection
      参数:
      path - 检查指定路径是否是 boolean.
      返回:
      指定路径是否是 boolean.

    • getDouble

      public double getDouble(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 double 类型的值.

      如果这个 double 不存在, 但已指定一个缺省值, 这将返回缺省值.

      如果这个 double 不存在, 并且没有指定缺省值, 则返回0.

      原文: Gets the requested double by path.

      If the double does not exist but a default value has been specified, this will return the default value. If the double does not exist and no default value was specified, this will return 0.

      指定者:
      getDouble 在接口中 ConfigurationSection
      参数:
      path - 获取double的路径.
      返回:
      返回一个double.

    • getDouble

      public double getDouble(String path, double def)
      从接口复制的说明: ConfigurationSection
      在指定路径上获取一个double, 如果无法获取, 则直接返回默认值.

      如果无法获取到一个 double, 将不会尝试去缺省列表中去获取, 而是直接返回指定的默认值.

      原文: Gets the requested double by path, returning a default value if not found.

      If the double does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.

      指定者:
      getDouble 在接口中 ConfigurationSection
      参数:
      path - 获取 double 的路径.
      def - 当指定路径上没有值, 或者不是 double 类型时, 返回这个值.
      返回:
      返回一个 double.

    • isDouble

      public boolean isDouble(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 double.

      如果路径存在, 但不是 double, 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if the specified path is a double.

      If the path exists but is not a double, this will return false. If the path does not exist, this will return false. If the path does not exist but a default value has been specified, this will check if that default value is a double and return appropriately.

      指定者:
      isDouble 在接口中 ConfigurationSection
      参数:
      path - 检查指定路径是否是 double.
      返回:
      指定路径是否是 double.

    • getLong

      public long getLong(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 long 类型的值.

      如果这个 long 不存在, 但已指定一个缺省值, 这将返回缺省值.

      如果这个 long 不存在, 并且没有指定缺省值, 则返回 0.

      原文: Gets the requested long by path.

      If the long does not exist but a default value has been specified, this will return the default value. If the long does not exist and no default value was specified, this will return 0.

      指定者:
      getLong 在接口中 ConfigurationSection
      参数:
      path - 获取long的路径.
      返回:
      返回一个long.

    • getLong

      public long getLong(String path, long def)
      从接口复制的说明: ConfigurationSection
      在指定路径上获取一个 long, 如果无法获取, 则直接返回默认值.

      如果无法获取到一个 long, 将不会尝试去缺省列表中去获取, 而是直接返回指定的默认值.

      原文: Gets the requested long by path, returning a default value if not found.

      If the long does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.

      指定者:
      getLong 在接口中 ConfigurationSection
      参数:
      path - 获取 long 的路径.
      def - 当指定路径上没有值, 或者不是 long 类型时, 返回这个值.
      返回:
      返回一个 long.

    • isLong

      public boolean isLong(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 long.

      如果路径存在, 但不是 long, 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if the specified path is a long.

      If the path exists but is not a long, this will return false. If the path does not exist, this will return false. If the path does not exist but a default value has been specified, this will check if that default value is a long and return appropriately.

      指定者:
      isLong 在接口中 ConfigurationSection
      参数:
      path - 检查指定路径是否是 long.
      返回:
      指定路径是否是 long.

    • getList

      public List<?> getList(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 List 类型的值.

      如果这个 List 不存在, 但已指定一个缺省值, 这将返回缺省值.

      如果这个 List 不存在, 并且没有指定缺省值, 则返回 null.

      原文: Gets the requested List by path.

      If the List does not exist but a default value has been specified, this will return the default value. If the List does not exist and no default value was specified, this will return null.

      指定者:
      getList 在接口中 ConfigurationSection
      参数:
      path - 获取 List 的路径.
      返回:
      返回一个 List.

    • getList

      public List<?> getList(String path, List<?> def)
      从接口复制的说明: ConfigurationSection
      在指定路径上获取一个 List, 如果无法获取, 则直接返回默认值.

      如果无法获取到一个 List, 将不会尝试去缺省列表中去获取, 而是直接返回指定的默认值.

      原文: Gets the requested List by path, returning a default value if not found.

      If the List does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.

      指定者:
      getList 在接口中 ConfigurationSection
      参数:
      path - 获取 List 的路径.
      def - 当指定路径上没有值, 或者不是 List 类型时, 返回这个值.
      返回:
      返回一个 List.

    • isList

      public boolean isList(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 List.

      如果路径存在, 但不是 List, 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if the specified path is a List.

      If the path exists but is not a List, this will return false. If the path does not exist, this will return false. If the path does not exist but a default value has been specified, this will check if that default value is a List and return appropriately.

      指定者:
      isList 在接口中 ConfigurationSection
      参数:
      path - 检查指定路径是否是 List.
      返回:
      指定路径是否是 List.

    • getStringList

      public List<String> getStringList(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 List<String>.

      如果列表不存在，但已指定一个缺省值，这将返回默认值.

      如果列表不存在，并且没有指定缺省值，这将返回一个空的列表.

      此方法会尽可能的将 List 中所有的项转化为 String, 但是如果值本身不兼容, 将会发生不可预计的状况.

      原文: Gets the requested List of String by path.

      If the List does not exist but a default value has been specified, this will return the default value. If the List does not exist and no default value was specified, this will return an empty List.

      This method will attempt to cast any values into a String if possible, but may miss any values out if they are not compatible.

      指定者:
      getStringList 在接口中 ConfigurationSection
      参数:
      path - 要获取 List<String> 的路径.
      返回:
      返回一个 List<String>.

    • getIntegerList

      public List<Integer> getIntegerList(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 List<Integer>.

      如果列表不存在，但已指定一个缺省值，这将返回默认值.

      如果列表不存在，并且没有指定缺省值，这将返回一个空的列表.

      此方法会尽可能的将 List 中所有的项转化为 Integer, 但是如果值本身不兼容, 将会发生不可预计的状况.

      原文: Gets the requested List of Integer by path.

      If the List does not exist but a default value has been specified, this will return the default value. If the List does not exist and no default value was specified, this will return an empty List.

      This method will attempt to cast any values into a Integer if possible, but may miss any values out if they are not compatible.

      指定者:
      getIntegerList 在接口中 ConfigurationSection
      参数:
      path - 要获取 List<Integer> 的路径.
      返回:
      返回一个 List<Integer>.

    • getBooleanList

      public List<Boolean> getBooleanList(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 List<Boolean>.

      如果列表不存在，但已指定一个缺省值，这将返回默认值.

      如果列表不存在，并且没有指定缺省值，这将返回一个空的列表.

      此方法会尽可能的将 List 中所有的项转化为 Boolean, 但是如果值本身不兼容, 将会发生不可预计的状况.

      原文: Gets the requested List of Boolean by path.

      If the List does not exist but a default value has been specified, this will return the default value. If the List does not exist and no default value was specified, this will return an empty List.

      This method will attempt to cast any values into a Boolean if possible, but may miss any values out if they are not compatible.

      指定者:
      getBooleanList 在接口中 ConfigurationSection
      参数:
      path - 要获取 List<Boolean> 的路径.
      返回:
      返回一个 List<Boolean>.

    • getDoubleList

      public List<Double> getDoubleList(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 List<Double>.

      如果列表不存在，但已指定一个缺省值，这将返回默认值.

      如果列表不存在，并且没有指定缺省值，这将返回一个空的列表.

      此方法会尽可能的将 List 中所有的项转化为 Double, 但是如果值本身不兼容, 将会发生不可预计的状况.

      原文: Gets the requested List of Double by path.

      If the List does not exist but a default value has been specified, this will return the default value. If the List does not exist and no default value was specified, this will return an empty List.

      This method will attempt to cast any values into a Double if possible, but may miss any values out if they are not compatible.

      指定者:
      getDoubleList 在接口中 ConfigurationSection
      参数:
      path - 要获取 List<Double>的路径.
      返回:
      要获取 List<Double>.

    • getFloatList

      public List<Float> getFloatList(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 List<Float>.

      如果列表不存在，但已指定一个缺省值，这将返回默认值.

      如果列表不存在，并且没有指定缺省值，这将返回一个空的列表.

      此方法会尽可能的将 List 中所有的项转化为 Float, 但是如果值本身不兼容, 将会发生不可预计的状况.

      原文: Gets the requested List of Float by path.

      If the List does not exist but a default value has been specified, this will return the default value. If the List does not exist and no default value was specified, this will return an empty List.

      This method will attempt to cast any values into a Float if possible, but may miss any values out if they are not compatible.

      指定者:
      getFloatList 在接口中 ConfigurationSection
      参数:
      path - 要获取 List<Float>的路径.
      返回:
      返回一个 List<Float>.

    • getLongList

      public List<Long> getLongList(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 List<Long>.

      如果列表不存在，但已指定一个缺省值，这将返回默认值.

      如果列表不存在，并且没有指定缺省值，这将返回一个空的列表.

      此方法会尽可能的将 List 中所有的项转化为Long, 但是如果值本身不兼容, 将会发生不可预计的状况.

      原文: Gets the requested List of Long by path.

      If the List does not exist but a default value has been specified, this will return the default value. If the List does not exist and no default value was specified, this will return an empty List.

      This method will attempt to cast any values into a Long if possible, but may miss any values out if they are not compatible.

      指定者:
      getLongList 在接口中 ConfigurationSection
      参数:
      path - 要获取 List<Long>的路径.
      返回:
      返回一个 List<Long>.

    • getByteList

      public List<Byte> getByteList(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 List<Byte>.

      如果列表不存在，但已指定一个缺省值，这将返回默认值.

      如果列表不存在，并且没有指定缺省值，这将返回一个空的列表.

      此方法会尽可能的将 List 中所有的项转化为 Byte, 但是如果值本身不兼容, 将会发生不可预计的状况.

      原文: Gets the requested List of Byte by path.

      If the List does not exist but a default value has been specified, this will return the default value. If the List does not exist and no default value was specified, this will return an empty List.

      This method will attempt to cast any values into a Byte if possible, but may miss any values out if they are not compatible.

      指定者:
      getByteList 在接口中 ConfigurationSection
      参数:
      path - 要获取 List<Byte>的路径.
      返回:
      返回一个 List<Byte>.

    • getCharacterList

      public List<Character> getCharacterList(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 List<Character>.

      如果列表不存在，但已指定一个缺省值，这将返回默认值.

      如果列表不存在，并且没有指定缺省值，这将返回一个空的列表.

      此方法会尽可能的将 List 中所有的项转化为 Character, 但是如果值本身不兼容, 将会发生不可预计的状况.

      原文: Gets the requested List of Character by path.

      If the List does not exist but a default value has been specified, this will return the default value. If the List does not exist and no default value was specified, this will return an empty List.

      This method will attempt to cast any values into a Character if possible, but may miss any values out if they are not compatible.

      指定者:
      getCharacterList 在接口中 ConfigurationSection
      参数:
      path - 要获取 List<Character>的路径.
      返回:
      返回一个 List<Character>.

    • getShortList

      public List<Short> getShortList(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 List<Short>.

      如果列表不存在，但已指定一个缺省值，这将返回默认值.

      如果列表不存在，并且没有指定缺省值，这将返回一个空的列表.

      此方法会尽可能的将 List 中所有的项转化为 Short, 但是如果值本身不兼容, 将会发生不可预计的状况.

      原文: Gets the requested List of Short by path.

      If the List does not exist but a default value has been specified, this will return the default value. If the List does not exist and no default value was specified, this will return an empty List.

      This method will attempt to cast any values into a Short if possible, but may miss any values out if they are not compatible.

      指定者:
      getShortList 在接口中 ConfigurationSection
      参数:
      path - 要获取 List<Short>的路径.
      返回:
      返回一个 List<Short>.

    • getMapList

      public List<Map<?,?>> getMapList(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 List<Maps>.

      如果列表不存在，但已指定一个缺省值，这将返回默认值.

      如果列表不存在，并且没有指定缺省值，这将返回一个空的列表.

      此方法会尽可能的将 List 中所有的项转化为 Map, 但是如果值本身不兼容, 将会发生不可预计的状况.

      原文: Gets the requested List of Maps by path.

      If the List does not exist but a default value has been specified, this will return the default value. If the List does not exist and no default value was specified, this will return an empty List.

      This method will attempt to cast any values into a Map if possible, but may miss any values out if they are not compatible.

      指定者:
      getMapList 在接口中 ConfigurationSection
      参数:
      path - 要获取 List<Maps>的路径.
      返回:
      返回一个 List<Maps>.

    • getSerializable

      public <T extends ConfigurationSerializable> T getSerializable(String path, Class<T> clazz)
      从接口复制的说明: ConfigurationSection
      Gets the requested ConfigurationSerializable object at the given path. If the Object does not exist but a default value has been specified, this will return the default value. If the Object does not exist and no default value was specified, this will return null.
      指定者:
      getSerializable 在接口中 ConfigurationSection
      类型参数:
      T - the type of ConfigurationSerializable
      参数:
      path - the path to the object.
      clazz - the type of ConfigurationSerializable
      返回:
      Requested ConfigurationSerializable object

    • getSerializable

      public <T extends ConfigurationSerializable> T getSerializable(String path, Class<T> clazz, T def)
      从接口复制的说明: ConfigurationSection
      Gets the requested ConfigurationSerializable object at the given path, returning a default value if not found If the Object does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.
      指定者:
      getSerializable 在接口中 ConfigurationSection
      类型参数:
      T - the type of ConfigurationSerializable
      参数:
      path - the path to the object.
      clazz - the type of ConfigurationSerializable
      def - the default object to return if the object is not present at the path
      返回:
      Requested ConfigurationSerializable object

    • getVector

      public Vector getVector(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个Vector类型的值.

      如果这个Vector不存在, 但已指定一个缺省值, 这将返回缺省值. Vector. 如果这个Vector不存在, 并且没有指定缺省值, 则返回null.

      原文: Gets the requested Vector by path.

      If the Vector does not exist but a default value has been specified, this will return the default value. If the Vector does not exist and no default value was specified, this will return null.

      指定者:
      getVector 在接口中 ConfigurationSection
      参数:
      path - 获取Vector的路径.
      返回:
      返回一个Vector.

    • getVector

      public Vector getVector(String path, Vector def)
      从接口复制的说明: ConfigurationSection
      在指定路径上获取一个Vector, 如果无法获取, 则直接返回默认值.

      如果无法获取到一个 Vector, 将不会尝试去缺省列表中去获取, 而是直接返回指定的默认值.

      原文: Gets the requested Vector by path, returning a default value if not found.

      If the Vector does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.

      指定者:
      getVector 在接口中 ConfigurationSection
      参数:
      path - 获取 Vector 的路径.
      def - 当指定路径上没有值, 或者不是 Vector 类型时, 返回这个值.
      返回:
      返回一个 Vectorr.

    • isVector

      public boolean isVector(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 Vector .

      如果路径存在, 但不是 Vector , 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if the specified path is a Vector.

      If the path exists but is not a Vector, this will return false. If the path does not exist, this will return false. If the path does not exist but a default value has been specified, this will check if that default value is a Vector and return appropriately.

      指定者:
      isVector 在接口中 ConfigurationSection
      参数:
      path - 检查指定路径是否是 Vector .
      返回:
      指定路径是否是 Vector .

    • getOfflinePlayer

      public OfflinePlayer getOfflinePlayer(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 OfflinePlayer 类型的值.

      如果这个 OfflinePlayer 不存在, 但已指定一个缺省值, 这将返回缺省值.

      如果这个 OfflinePlayer 不存在, 并且没有指定缺省值, 则返回 null.

      原文: Gets the requested OfflinePlayer by path.

      If the OfflinePlayer does not exist but a default value has been specified, this will return the default value. If the OfflinePlayer does not exist and no default value was specified, this will return null.

      指定者:
      getOfflinePlayer 在接口中 ConfigurationSection
      参数:
      path - 获取 OfflinePlayer 的路径.
      返回:
      返回一个 OfflinePlayer.

    • getOfflinePlayer

      public OfflinePlayer getOfflinePlayer(String path, OfflinePlayer def)
      从接口复制的说明: ConfigurationSection
      在指定路径上获取一个 OfflinePlayer, 如果无法获取, 则直接返回默认值.

      如果无法获取到一个 OfflinePlayer, 将不会尝试去缺省列表中去获取, 而是直接返回指定的默认值.

      原文: Gets the requested OfflinePlayer by path, returning a default value if not found.

      If the OfflinePlayer does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.

      指定者:
      getOfflinePlayer 在接口中 ConfigurationSection
      参数:
      path - 获取 OfflinePlayer 的路径.
      def - 当指定路径上没有值, 或者不是 OfflinePlayer 类型时, 返回这个值.
      返回:
      返回一个 OfflinePlayer.

    • isOfflinePlayer

      public boolean isOfflinePlayer(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 OfflinePlayer.

      如果路径存在, 但不是 OfflinePlayer, 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if the specified path is a OfflinePlayer.

      If the path exists but is not a OfflinePlayer, this will return false. If the path does not exist, this will return false. If the path does not exist but a default value has been specified, this will check if that default value is a OfflinePlayer and return appropriately.

      指定者:
      isOfflinePlayer 在接口中 ConfigurationSection
      参数:
      path - 检查指定路径是否是 OfflinePlayer.
      返回:
      指定路径是否是 OfflinePlayer.

    • getItemStack

      public ItemStack getItemStack(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个 ItemStack 类型的值.

      如果这个 ItemStack 不存在, 但已指定一个缺省值, 这将返回缺省值.

      如果这个 ItemStack 不存在, 并且没有指定缺省值, 则返回 null.

      原文: Gets the requested ItemStack by path.

      If the ItemStack does not exist but a default value has been specified, this will return the default value. If the ItemStack does not exist and no default value was specified, this will return null.

      指定者:
      getItemStack 在接口中 ConfigurationSection
      参数:
      path - 获取 ItemStack 的路径.
      返回:
      返回一个 ItemStack.

    • getItemStack

      public ItemStack getItemStack(String path, ItemStack def)
      从接口复制的说明: ConfigurationSection
      在指定路径上获取一个 ItemStack, 如果无法获取, 则直接返回默认值.

      如果无法获取到一个 ItemStack, 将不会尝试去缺省列表中去获取, 而是直接返回指定的默认值.

      原文: Gets the requested ItemStack by path, returning a default value if not found.

      If the ItemStack does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.

      指定者:
      getItemStack 在接口中 ConfigurationSection
      参数:
      path - 获取ItemStack的路径.
      def - 当指定路径上没有值, 或者不是ItemStack类型时, 返回这个值.
      返回:
      返回一个ItemStack.

    • isItemStack

      public boolean isItemStack(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 ItemStack.

      如果路径存在, 但不是 ItemStack, 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if the specified path is a ItemStack.

      If the path exists but is not a ItemStack, this will return false. If the path does not exist, this will return false. If the path does not exist but a default value has been specified, this will check if that default value is a ItemStack and return appropriately.

      指定者:
      isItemStack 在接口中 ConfigurationSection
      参数:
      path - 检查指定路径是否是 ItemStack.
      返回:
      指定路径是否是 ItemStack.

    • getColor

      public Color getColor(String path)
      从接口复制的说明: ConfigurationSection
      在指定路径获取一个Color类型的值.

      如果这个Color不存在, 但已指定一个缺省值, 这将返回缺省值. Color.

      如果这个Color不存在, 并且没有指定缺省值, 则返回null.

      原文: Gets the requested Color by path.

      If the Color does not exist but a default value has been specified, this will return the default value. If the Color does not exist and no default value was specified, this will return null.

      指定者:
      getColor 在接口中 ConfigurationSection
      参数:
      path - 获取Color的路径.
      返回:
      返回一个Color.

    • getColor

      public Color getColor(String path, Color def)
      从接口复制的说明: ConfigurationSection
      在指定路径上获取一个 Color, 如果无法获取, 则直接返回指定默认值.

      如果无法获取到一个 Color, 将不会尝试去缺省列表中去获取, 而是直接返回指定的默认值.

      原文: Gets the requested Color by path, returning a default value if not found.

      If the Color does not exist then the specified default value will returned regardless of if a default has been identified in the root Configuration.

      指定者:
      getColor 在接口中 ConfigurationSection
      参数:
      path - 获取 Color 的路径.
      def - 当指定路径上没有值, 或者不是 Color 类型时, 返回这个值.
      返回:
      返回一个 Color.

    • isColor

      public boolean isColor(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 Color.

      如果路径存在, 但不是 Color, 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if the specified path is a Color.

      If the path exists but is not a Color, this will return false. If the path does not exist, this will return false. If the path does not exist but a default value has been specified, this will check if that default value is a Color and return appropriately.

      指定者:
      isColor 在接口中 ConfigurationSection
      参数:
      path - 检查指定路径是否是 Color.
      返回:
      指定路径是否是 Color.

    • getConfigurationSection

      public ConfigurationSection getConfigurationSection(String path)
      从接口复制的说明: ConfigurationSection
      获取一个 ConfigurationSection ,它是一个以指定路径作为基点的新的配置项,修改会同步.

      如果这个 ConfigurationSection 不存在, 但已指定一个缺省值, 这将返回缺省值.

      如果这个 ConfigurationSection 不存在, 并且没有指定缺省值, 则返回 null.

      更人性化的解释: 现在有一个配置文件如下 

       root: 
   branch1:
     branch1_1: something
     branch1_2: something
   branch2: 
     branch2_1: something
     branch3_2: something
      如果调用 ConfigurationSection.getConfigurationSection(java.lang.String) 参数为("branch1") ,则会返回 
         branch1:
     branch1_1: something
     branch1_2: something
      并且修改会同步

      原文: Gets the requested ConfigurationSection by path.

      If the ConfigurationSection does not exist but a default value has been specified, this will return the default value. If the ConfigurationSection does not exist and no default value was specified, this will return null.

      指定者:
      getConfigurationSection 在接口中 ConfigurationSection
      参数:
      path - 获取 ConfigurationSection 的路径.
      返回:
      返回一个 ConfigurationSection.

    • isConfigurationSection

      public boolean isConfigurationSection(String path)
      从接口复制的说明: ConfigurationSection
      检查指定路径是否是 ConfigurationSection.

      如果路径存在, 但不是 ConfigurationSection, 则返回 false.

      如果路径不存在, 则返回 false.

      如果路径不存在, 但在缺省列表中存在该路径, 则在缺省列表中重复匹配该规则, 直到返回一个适当的值.

      原文: Checks if the specified path is a ConfigurationSection.

      If the path exists but is not a ConfigurationSection, this will return false. If the path does not exist, this will return false. If the path does not exist but a default value has been specified, this will check if that default value is a ConfigurationSection and return appropriately.

      指定者:
      isConfigurationSection 在接口中 ConfigurationSection
      参数:
      path - 检查指定路径是否是 ConfigurationSection.
      返回:
      指定路径是否是 ConfigurationSection.

    • isPrimitiveWrapper

      protected boolean isPrimitiveWrapper(Object input)

    • getDefault

      protected Object getDefault(String path)

    • mapChildrenKeys

      protected void mapChildrenKeys(Set<String> output, ConfigurationSection section, boolean deep)

    • mapChildrenValues

      protected void mapChildrenValues(Map<String,Object> output, ConfigurationSection section, boolean deep)

    • createPath

      public static String createPath(ConfigurationSection section, String key)
      Creates a full path to the given ConfigurationSection from its root Configuration.

      You may use this method for any given ConfigurationSection, not only MemorySection.

      参数:
      section - Section to create a path for.
      key - Name of the specified section.
      返回:
      Full path of the section from its root.

    • createPath

      public static String createPath(ConfigurationSection section, String key, ConfigurationSection relativeTo)
      Creates a relative path to the given ConfigurationSection from the given relative section.

      You may use this method for any given ConfigurationSection, not only MemorySection.

      参数:
      section - Section to create a path for.
      key - Name of the specified section.
      relativeTo - Section to create the path relative to.
      返回:
      Full path of the section from its root.

    • toString

      public String toString()
      覆盖:
      toString 在类中 Object